Laserite - Laser cutting and engraving

• Metal Marking Spray
  • LLMark

LLMark

Components:

Hazards:

Exposure routes - dermal contact, ingestion and inhalation.
Emergency overview: Extremely flammable. Vapours can cause flash fire. Contents under pressure. Susceptible to rupture if heated. Inhalation can cause headache, dizziness, drowsiness, nausea, narcosis and unconsciousness. Intentional misuse such as deliberate concentration and inhalation of vapours may be harmful or fatal. May cause eye irritation.

Overexposure effects:

Contains Ethylic Alcohol (Ethanol). Overexposure of ethanol can cause liver toxicity and central nervous system depression. Avoid using during pregnancy. Contains metal oxides effects of which can cause joint pains, liver and kidney damage. Contains Amorphous Silica, which can cause silicosis.

First Aid Measures:

• EYES - in case of contact with eyes remove contact lenses (if present) and flush with plenty of water. If irritation persists beyond 15 minutes seek immediate medical attention.
• SKIN - in case of contact with skin wash thoroughly with soap and water. If irritation persists beyond 15 minutes seek immediate medical attention.
• INGESTION - Immediately rinse mouth with plenty of water. Do NOT induce vomiting. Seek immediate medical attention.
• INHALATION - Move person immediately to fresh air. If irritation or respiratory difficulty occurs seek immediate medical attention.

Fire-fighting Measures:

This product is HIGHLY FLAMMABLE.  Extinguish fire by use of foam, carbon dioxide, dry chemical, water for or water spray. The product vapours are heavier than air and can travel along surfaces to reach a remote ignition source.

Aerosol cans may burst in the heat of a fire.

Fire-fighters should wear protective self-contained breathing equipment in areas where chemicals are stored. Burning may produce carbon dioxide and carbon monoxide, which are potential asphyxiates.

Release measures:

Prevent prolongs breathing of vapours. Wear protective clothing and use respirators safety equipment. Use only in well ventilated areas. Eliminate all potential ignition sources including but not limited to mobile phones, computers and any other types of electrical equipment, sources of spark, heat and flame.
Wash hands thoroughly after use. Do not eat, drink or smoke while using the product.

Storage:

Store all chemical safely. Do not puncture or crush the can. Minimum storage temperature 17c. Do not store in environments exceeding 30c. Keep away from sources of heat and out of direct sunlight.

Exposure controls:

Protective equipment:

Use protective gloves and clothing to avoid skin contamination. Use protective eyewear to avoid eye contamination. Use a respiratory mask to avoid inhalation. In particular, where work environments do not meet the specified safe limits a respiratory device should be used to comply with OSHA 19010.134, ANSI Z88.2

Physical and Chemical Properties:

Stability and reactivity:

Toxicological Information:

None of the components are listed as potential carcinogens by IARC, NTP or OSHA. The primary irritant effect is to the eyes, skin and mucous membranes

Ecological Information:

This test has not been performed.

Disposal Consideration:

Consult Government and local Authorities to ensure compliance with laws and local regulations.

Transportation:

Aerosol, Class 2.1, UN1950

Regulatory information - Risk:

Regulatory information - Safety:

Other information:

Employers should use this information only as a supplement to other information gathered by them and should make independent judgement of suitability of this information to ensure proper use and health and safety of employees