| Dimensions | 1920mm(W) x 1240mm(D) x 1140mm(H) approx |
|---|---|
| Net Weight | Model dependant 580-650kg approx |
| Work Area with standard table | 1245 x 710mm |
| Work area with Class 4 pass-through | 1245 x ∞ infinity |
| Work area with CCD system | 1100 x 700mm |
| Z-clearance | 150 – 300mm depending on table type |
| Rotary Items (max) | TBA Winter 2008 |
| Max raster speed | 254cm/sec |
|---|---|
| Max raster speed upgradeable to | Not applicable |
| Motion system acceleration | 2g |
| Motion system main axis bearing | Double THK – stainless steel |
| Motors | Brushless DC servo |
| Optics Lens | ZnSe 28mm diameter |
|---|---|
| Optics Mirrors | Si total reflector |
| Laser pointer | Standard |
| Lens available: 50, 63, 127mm | One, 50mm standard, optional 63mm £332, 127mm £393 |
| Number of reflective mirrors | 4 |
| Operating Temperature | 15°c min to 30°c max |
|---|---|
| Humidity | 40% to 70%, non-condensing |
| Vibration/Dust/Oil/Moisture | Intolerant |
| Job Control Basic | Not applicable |
|---|---|
| Job Control Advanced | Not applicable |
| Job Control Expert | Standard |
| Corel Graphics Suite vX3 | Standard |
| TroCAM | Optional (standard package) £1,385 |
| LaserType v3 | Optional £1,250 |
| Computer | Included |
|---|---|
| Rotary attachment with cones | To be released Winter 08 |
| Rotary attachment with rolls | To be released Winter 08 |
| Rotary attachment with cones and rolls | To be released Winter 08 |
| Electro-optic Auto-focus | Optional £530 |
| I-Cut CCD basic | Optional £8,995 |
| I-Cut CCD lite | Optional £10,450 |
| I-Cut CCD Professional | Optional £12,650 |
| Gas kit | Optional £1,275 |
| Pass-through opening (Class 4) | Optional £592 |
| Magnetic table | Standard |
|---|---|
| Honeycomb table (HCT) | Optional £450 |
| Lamella cutting table | Optional £1,581 |
| Manual Shuttle Table | Optional, available Winter 2008 |
| Automatic Shuttle Table | Optional, available Winter 2008 |
| Vacuum table | Optional £2,020 |
| Max load magnetic table | 25kg |
| Max load HCT | 5kg – sheet materials only |
| Max load lamella table | 20kg – sheet materials only |
| Max load manual shuttle table | TBA |
| Max load automatic shuttle table | TBA |
| Max load vacuum table | 15kg – thin film materials only |
| Air assist with on-board pump | Standard |
|---|---|
| Air assist type | Coaxial to laser |
| Air pressurised nosecone | Standard |
| External source gas kit | Optional £1,275 |
| Harsh Environment protection kit | Standard |
| In-pack protection | Standard |
| CE | Compliant |
|---|---|
| CDRH | Compliant Class II, Class IV with pass-through |
| RoHS | Compliant |
| FDA | Approved |
| Interlock | Double system |
| Engraving port diameter | 45mm id |
|---|---|
| Engraving port air velocity | 0.02m3/sec at 45mm duct that connects to laser head |
| Cutting port diameter | 100mm od |
| Cutting port velocity | 0.27m3/sec at end of 100mm flex |
| Device type | Bi-directional |
|---|---|
| Cable type/max length | USB/5m |
| Code | Trotec JC or HPGL |
| Laser type | CO2 sealed-off all-metal |
|---|---|
| Laser wavelength | 10.6 µm |
| Laser power options | 75w, 85w, 95w, 120w, 200w |
| Laser cooling air | 75w, 85w, 95w, 120w |
| Laser cooling water | 120w, 200w |
| Laser module manufacturer | Synrad |
| With laser 75w, 85w, 95w | single phase 230v-50Hz – 16a/3500w |
|---|---|
| With laser 120w air-cooled | single phase 230v-50Hz – 16a/3900w |
| With laser 120w water-cooled | single phase 230v-50Hz – 16a/3500w |
| Chiller for 120w water-cooled | single phase 230v-50Hz – 16a/1800w |
| With laser 200w | 3 x 415v+N+PE 50Hz - 16a/5800w |
| Chiller for 200w | single phase 230v-50Hz – 16a/2200w |
| Filtration device 800iD | single phase 230v-50Hz – 13a/2400w |
| Mechanics/electronics | 2 years |
|---|---|
| System optics | Excluded* |
| Laser module | 1 year |
| Labour | 6 months on-site** |
| Service contracts | Optional, ask for details |