| Dimensions without trolley | 974mm(W) x 765mm(D) x 457mm(H) |
|---|---|
| Dimensions with trolley | 810mm(W) x 510mm(D) x 580mm(H) |
| Weight without trolley | 88kg approx |
| Weight with trolley | 109kg approx |
| Work Area | 610X305mm |
| Z-clearance | 157mm (with 50mm lens) |
| Rotary items (max) | 168mm Ø - 350mm length |
| Max raster speed - standard | 180cm/sec | |
|---|---|---|
| Max raster speed - upgradeable to | 280cm/sec | £1,250 |
| Motion system acceleration | 4g | |
| Motion System main axis bearing | THK - stainless steel | |
| Motors | Brusheless DC servo |
| Optics Lens | ZnSe 15mm diameter | |
|---|---|---|
| Optics Mirrors | Si total reflector | |
| Laser Pointer | Standard | |
| Lens available: 38-50-63mm | One: 50mm standard, others optional | £235 |
| Number of reflective mirrors | 3 |
| Operating temperature | 15° min to 30° max | |
|---|---|---|
| Humidity | 40% to 70%, non-condensing | |
| Vibration/Dust/Oil/Moisture | Intolerant |
| Job Control Basic | Standard | |
|---|---|---|
| Job Control Advanced | Optional upgrade from basic | £650 |
| Job Control Expert | Optional upgrade from basic | £860 |
| Corel Graphics Suite vX3 | Optional | £147 |
| TroCAM | Not available | |
| LaserType v3 | Optional | £1,250 |
| Trolley | Optional | £335 |
|---|---|---|
| Computer | Optional | £530 |
| Rotary attachment with cones | Optional | £775 |
| Rotary attachment with rolls | Not available | |
| Rotary attachment with cones and rolls | Not available | |
| Electro-optic Auto-focus | Optional | £350 |
| Magnetic table | Standard | |
|---|---|---|
| Honeycomb Cutting Table (HCT) | Optional | £258 |
| Underside Extraction Table (UE) -uses HCT | Not available | |
| Vacuum Table (VT) - uses HCT | Not available | |
| Lamella table | Not available | |
| Manual Shuttle table | Not available | |
| Automatic Shuttle table | Not available | |
| Max load magnetic table | 10kg | |
| Max load for HCT | 2kg - sheet materials only | |
| Max load shuttle table | Not available |
| Air assist with on-board pump | Optional | £725 |
|---|---|---|
| Air assist type | Directional to beam, approx 30° | |
| Air pressurised nosecone | Not available | |
| External source gas kit | Not available | |
| Harsh Environment Protection Kit | Not available | |
| In-pack protection | standard |
| CE | Compliant |
|---|---|
| CDRH | Compliant Class II |
| RoHS | Compliant |
| FDA | Approved |
| Interlock | Double system |
| Engraving port diameter | 100mm od |
|---|---|
| Engraving port air velocity - filtration | 0.10m3/sec at end 100mm flexi |
| Engraving port air velocity - exhaust to atmosphere | 0.18m3/sec at end 100mm flexi |
| Cutting port diameter | Not available |
| Cutting port air velocity | Not available |
| Device Type | Bi-directional |
|---|---|
| Cable type/max length | USB/5m |
| Code | Trotec JC or HPGL |
| Laser type | CO2 sealed-off all-metal |
|---|---|
| Laser wavelength | 10.6µm |
| Laser power options | 12w, 25w, 30w or 45w |
| Laser cooling air | All models air-cooled |
| Laser cooling water | Not Available |
| Laser module manufacturer | Synrad |
| With laser <45w air-cooled | single phase 230V-50Hz-13a/400-1300w |
|---|---|
| With laser 60-95w air-cooled | Not applicable |
| With laser 120w air-cooled | Not applicable |
| With laser 120w water-cooled | Not applicable |
| Chiller for 120w water-cooled | Not applicable |
| With laser 200w water-cooled | Not applicable |
| Chiller for 200w water-cooled | Not applicable |
| Mechanics/electronics | 2 years |
|---|---|
| System optics | Excluded* |
| Laser module | <30w 2 years, 45w 1 year |
| Labour | 6 months on-site ** |
| Service Contracts | Optional, ask for quote |