| Specification | Specification Value |
|---|---|
| Work Area | 600x400mm |
| Max material size | 600mm x infinity (feed through) |
| Max material thickness | 25mm |
| Max raster speed | 1.2m/sec |
| Min vector speed | 0.01mm/sec |
| Acceleration | 2.5g |
| Laser safety class | CDRH Class 2 |
| Dimensions | 1150mm(W) x 710mm(D) x 1060mm(H) |
| Weight (approx) | 150kg |
| Device type/connection | PCI - 2m cable |
| Electrical Requirements | Single phase 13a 230V / 50Hz |
| Power consumption | 2kW max |
| Motion System | All metal THK |
| Motors | Micro-stepper |
| Positioning accuracy | 0.01mm |
| Laser | Synrad all-metal RF excited 10.6um |
| Laser power | 30w |
| Laser cooling | Air-cooled (x4) |
| Optics | enlarged |
| Optic Protection | air protection |
| Laser Pointer | standard |
| Lens | 63.5mm |
| Air assist | standard |
| Air assist compressor | standard, on-board |
| Air assist design | coaxial |
| Protective nosecone | standard |
| Table | Lamella, removable bars |
| Extraction ports | 2 x 100mm o/d (male) |
| Surface extraction | standard |
| Underside Extraction | standard |
| P4 PC (high spec) | optional |
| LLcut control software | standard |
| CorelDraw X3 | Optional |
| Warranty machine | 2 years parts replacement |
| Warranty laser | 2 years parts replacement |
| Warranty labour | Six months on-site |
| Emergency stop | standard |
| Key switch protection | standard |